True Induction TI-3B User Manual download pdf (Page 4)

II. Cooktop Installation

Dimensions and Placement for Cut-out in Countertop

This appliance is not user serviceable. Installation must be completed by a qualied

technician.

WARNING!

FOR YOUR SAFETY: Do not store or use gasoline or other ammable vapors and liquids in

the vicinity of the unit. To eliminate the risk of burns or re due to overheating, cabinets located

above the induction cooktop should be avoided or allowed a minimum of 30’’ clearance. If cabi-

net space is available, the risk can be reduced by installing a range hood at a minimum of 5

inches below the bottom of the cabinets.

IMPORTANT INSTALLATION INFORMATION:

All electric cooktops run o of a single phase, three-wire cable, 120V/60Hx AC only electrical

supply with ground. The installation should be made using wires, conduits, and ttings size in

accordance with the National Electrical Code– ANSI/NFPA 70.

 Cut a rectangle hole in the countertop where the cook top is to be placed. The dimensions

for the cut-out are 21 3/4' x 19 3/8''

 The cut-out must be placed at least 2 1/2" from any side of the countertop.

 To achieve ush mounting installation, use a router tool to round the corners of the hole cut

into the countertop.

TRIPLE BURNER INDUCTION COOKTOP MANUAL P.2

20’’

13 3/4’’

21 3/4’’

19 3/8’’

1 2 3 4 5 6 7 8 9 ... 12 13

No comments

True Induction TI-3B User Manual Page 4